Tree Trimming as easy as it may sound is very dangerous. The removal of limbs and branches from a tree without the removal of the tree itself can be dangerous and requires a different set of skills. There are must-have safety tips that you must follow and you should be careful with it. Tree trimming operations require climbing and pruning, often with tools like chainsaws or trimmers. Here are 7 tips before you trim your trees
Wear the right PPE
PPE stood for Personal Protective Equipment. Protect your hands with leather lineman’s gloves. If you are involved in electrical work, always wear close-fitting, long sleeved clothing and a non-conductive hard hat. These operations can expose your eyes to dust, wood particles, insects, and pine needles, so you have to be sure to wear comfortable eye protection.
Protect passersby and co-workers
Wherever you are working, make sure that you mark off your work area around the tree. This will protect passersby and co-workers. If you are working on a tree that extends near or over a crowded area, especially like a road, wear high visibility clothing. You should keep in mind the speed limit of that road and its shoulder width to determine what cones and signs are needed.
Do a pre-work assessment
Each tree is different. Each one requires a different strategy and a different set of gear. Whatever it is that you are using, make sure that you have a protective plan to back it up. If you are using a ladder, tie it off on a branch that is secure. If it involves higher climbs, you may need a harness, climbing rope, or an aerial lift. Make sure everything is in order and double-check if everything is in shape. For example, inspect ropes, harnesses, and latches before and after each use.
Work with a partner
It is always a good idea to work with another person no matter what sort of job it is. In this case, it is good to have a person to back you up, who stays on the ground while you are climbing. Make sure that you and your partner have first-hand training in CPR and first aid. This might be really helpful in the event of an emergency.
Don’t use conductive tools near work lines
Conductive tools include ladders, pole trimmers, or other tools that can conduct electricity. If they come into contact with overhead power lines or electrical conductors. However, downed power lines can still contain energy which can gravely injure or kill you. Treat all power lines as if they are energized, just to be safe. Click here for more information.